EINHELL LE-HS 1200 Mode D'emploi page 8

Anleitung LE-HS 1200 SPK 1
GB
Switching on
Important!
Pull out the plug before
Before pressing the On/Off
making any changes to the
switch, check that the saw blade
circular saw!
is properly fitted, that the moving
parts run smoothly and that the
clamping screws are tight.
2 1
4
Changing the saw blade
1. Open the hinged guard hood 1 and hold.
2. Use the face spanner 2 to stop the saw blade from moving.
3. Undo the screw
4. Remove the flange 4 and the saw blade by dropping down
and out.
5. Clean the flange and insert a new blade. Note the direction
of rotation (see arrow on the guard hood).
6. Tighten the screw and check for concentricity.
8
08.06.2005 10:13 Uhr Seite 8
Switching on and off
To switch on: Press the interlock button 3 and the switch 4
simultaneously.
To switch off: Release the interlock button and the switch.
3 4