Separating The Connection; Re-Establishing The Connection; Using The Hands-Free Appliance - SilverCrest SBTF 10 C2 Mode D'emploi

able for other mobile telephones. To use the hands-free
appliance with a linked mobile phone that is not the last
used mobile phone, the connection must be made via the
®
Bluetooth menu of the mobile phone.

Separating the connection

If you wish separate the mobile telephone from the hands-
free appliance, for example, to connect it to another
®
Bluetooth appliance:
●
Switch the hands-free appliance off
or
●
separate the connection over the Bluetooth
the mobile telephone.
You need not erase the coupling with the hands-free appli-
ance in the Bluetooth

Re-establishing the connection

If you want to reconnect the hands-free appliance with the
last used mobile phone:
●
Check to see that Bluetooth
telephone, then switch the hands-free appliance on.
When connecting to a previously coupled mobile telephone
it is not necessary to enter a pass-code. You can set your
mobile telephone so that when the hands-free equipment is
switched on a connection with the mobile telephone is auto-
matically established. As soon as the hands-free equipment
is connected to the previously coupled mobile telephone a
short, high signal tone is emitted confi rming the connection.
Further information regarding automatic coupling can be
found in your mobile telephone's operating instructions.

Using the hands-free appliance

After successful coupling, the following functions are
available to you. Some of the described functions are
only possible with a mobile telephone that supports the
Handsfree Profi le (HFP).
SBTF 10 C2
®
menu to separate the connection.
®
is activated in the mobile
®
menu in
43
GB