Coupling The Hands-Free Appliance With Several Mobile Telephones - SilverCrest SBTF 10 C2 Mode D'emploi

and after a further 3 seconds a succession of low and
high signal tones are heard. The LED status indicator
7 lights up constantly and the hands-free equipment is
now in the coupling mode.
●
Select the hands-free provision "Car Kit" from the list of
available appliances for the mobile telephone.
●
GB
Enter in the pre-programmed passcode "9999" and
then confi rm it, which couples the appliances with each
other. You will hear a long high signal tone and the
LED status indicator 7 blinks every 3 seconds.
●
You can now use the hands-free appliance.
Note:
When using the latest mobile phones, (Smartphones) those
that are equipped with Bluetooth 2.0 or a more modern
version, it is possible that the pass code "9999" need not
be entered. If the coupling is not completed within 2 min-
utes, the hands-free appliance switches itself off . The LED
status indicator 7 extinguishes and you will hear a long
and deep signal tone. With some mobile telephones it is
possible that coupling does not automatically take place.
In this case coupling must be carried out additionally on
the mobile telephone. The LED status indicator 7 blinks
twice every 3 seconds until this has been carried out. Fur-
ther information can be found in your mobile telephone's
operating instructions.
Coupling the hands-free appliance
with several mobile telephones
You can couple the hands-free appliance with up to eight
mobile telephones. If a further mobile telephone is cou-
pled with the hands-free appliance, the coupling informa-
tion of the fi rst coupled mobile telephone is erased. How-
ever, it can only be connected with one mobile telephone.
When the hands-free appliance is switched on, within a
few seconds it attempts to make a connection to the last
used mobile phone. Should a connection not be possible,
the hands-free appliance nonetheless remains recognis-
42
SBTF 10 C2