grandimpianti WFEC 6 Mode D'emploi page 20

www.groupdynamics-laundry.com
sales@groupdynamics.lv
To remove this message and start the cycle
count over again, push the "-" key for 5
seconds with the door closed. The display
will read the total no. of cycles carried out.
To reset the cycle count, pressing the "-" key
again within 10 seconds.
8.5 IDENTIFYING AND ORDERING
SPARE PARTS
To identify the codes of spare parts refer to
the exploded drawings and relevant list. Once
you have identified your codes, send a
standard written order to the manufacturer,
mentioning clearly the model, serial number,
feed voltage and frequency of your appliance
and, of course, including the code and
description of the spare part you need.
9. SUGGESTIONS FOR MACHINE
LAY UP, DISMANTLING AND
DISPOSAL
If the washing machine is no longer to be
used, it is advisable to put it out of service
and suitably dispose of the resulting
materials, considering the indications
provided in chapter 3. For the sake of the
environment, please sort the materials in
accordance with the waste disposal
provisions in force in your country, so that
they can be properly disposed of or recycled.
All of the parts composing the machine can
be treated as solid urban waste, except for
the metal parts, which nevertheless are not
classed among special waste in most
European countries.
22