Steba MX 4 Plus Mode D'emploi page 18

Safety Contacts
∙ The device is equipped with 2 contacts on the lid of the jar, in order that the device
can not be opened during operation.
1) place the jar with the handle on the right side onto the motor part and en-
gage with a rotary motion.
2) Place the lid on the jar and let it engage into the hooks on the handle with
a rotary motion.
∙
The device can only be put into operation if all contacts are correctly en-
gaged!
∙ If the motor is in continuous operation for more than 2 minutes, the circuit breaker
switches the device off. Unplug the device and allow to cool down for about 10
minutes.
18