IKA VC 10 Mode D'emploi page 23

Details for editing the program
When a program is being edited,
following screen appears.
Sample for editing the program
Example of saving the last measurement
44
In this program, user can define up to 10 segments. The selected
segment is highlighted. Then, the user can edit, delete or
insert a segment in this program. The program is save automa-
tically.
Edit:
If the background of a selected value is yellow, the user can
change the setting of the pressure value or the time value.
Delete:
When a highlighted segment is deleted, the subsequent seg-
ments move upward, closing the gap created by the deleted
segment.
Edit pressure
Edit time
Safety
Service
Settings
Languages:
The "Languages" option allows the user to select the desired lan-
guage by turning and pressing the rotating/pressing knob (D). A
tick () indicates the language that is set for the system.
Units:
The "Units" option allows the user to select the desired unit for
displaying the temperature and pressure by turning and pressing
the rotating/pressing knob. For the temperature, the choice is bet-
ween "°C" or "°F". For the pressure, the choice is "mbar", "hPa",
"mmHg" or "Torr". A tick () indicates the unit that is set for the
system.
Display:
The "Display" option allows the user to change the background
color and brightness of the working screen.
In the "Password" menu, the user can protect the vacuum cont-
roller settings using a password.
(factory setting: 000)
In the "Service" menu, the valves and the pump can be operated
individually and also checked to ensure that they are operating
correctly. If no IKA MVP 10 digital / VACSTAR digital is connected,
the menu item "Pump" is greyed out and not active.
Sound:
The "Sound" option allows the user to activate/deactivate the
key-press sound and to set the volume.
Factory settings:
Select the "Factory settings" option by turning and pressing the
rotating/pressing knob. The system requests confirmation to re-
create the factory settings. You can choose if you want to reset
only the "Menu values", or only the "Programs". Alternatively, you
can reset all by selecting "All". Pressing the "OK" key resets the
system settings to the original standard values set at dispatch from
the factory (see "Menu structure" illustration).
Communication:
The "Device name" option allows the user to input a device name.
The device name appears on the opening screen when the device
is switched on.
This can be useful when using multiple devices with different set-
tings. This also facilitates the identification of each device when
communicating with a PC via USB, RS232 and Bluetooth, for ex-
ample.
Information:
The "Information" option offers the user an overview of the most
important system settings of the vacuum controller IKA VC 10.
45