Num'axes CANICOM VOICE 800 Guide D'utilisation page 17

•
Activate/deactivate the remote control
Remote control is supplied with battery fitted. No manual handling is required.
- Activate : Press the On/Off red button
Indications appear on the LCD screen.
- Deactivate : Press the On/Off red button
To increase the battery life, we recommend you to remove the battery from the remote control if you are not
using it for a long period.
•
Activate/deactivate the receiver collar
The receiver collar can be activated with the magnetic key or with the remote control.
Activate/deactivate the collar with the magnetic key or the remote control
−
Activate: approach the magnetic key or the area where the On/Off switch magnet is located in the remote
control until coming in contact with the
indicator light on the collar will flash in green indicating the collar is On.
−
Deactivate: move the magnetic key or area where the On/Off switch magnet is located in the remote
control until coming in contact with the
indicator light on the collar flashes from green to red then goes out indicating the collar is Off.
To increase the battery life, we recommend you to deactivate the collar if you are not using it for a long period.
Diagram 4
Activate/deactivate the receiver collar with
the magnetic key or the remote control
Approach until coming in contact
these two areas during 1 second
Guide d'utilisation CANICOM Voice 800 – indice A
located on the side of the remote control for 1 second.
for 1 second. The LCD screen is off.
symbol located on the collar, hold for 1 second (Diagram 4). The
symbol located on the collar, hold for 1 second (Diagram 4). The
17/60