Hands-Free Function - Hama LiberoBuds Mode D'emploi

5.3. Hands-free function

Note
• Note that support for certain key functions may vary depending
on your terminal device.
• For more information, please refer to the operating instructions of
your terminal device.
You can use the earphones as a hands-free set for your mobile phone.
Making a call
• Dial the number directly on your terminal device to make a call.
Accepting calls
• Briefly press the Multifunction button (5) on the left or right
earphone to accept an incoming call.
Rejecting an incoming call
• To reject an incoming call, press and hold the Multifunction
button (5) on the left or right earphone for about 2 seconds. You
will hear a short acoustic signal.
Ending a call
• To end a call, press and hold the Multifunction button (5) on the
left or right earphone for about 2 seconds during the call.
Redial
• Press the Multifunction button (5) on the left or right earphone
three times to call the number of the last call.
• You will hear a short beep.
5.5. Voice Assistant function
The Voice Assistant is an integrated, interactive function that
enables you to start communication with your Siri or Google Assistant
at the press of a button. This function enables you to ask questions
and get various forms of help from your voice assistant, even if you
are not holding your telephone in your hands.
Below you will find some examples selected from the large number of
possibilities.
Note – Siri
Siri is only available on suitable terminal devices with iOS 5 or
higher (from iPhone 4s onwards).
7