Bluetooth ® Pairing - Hama LiberoBuds Mode D'emploi

Masquer les pouces Voir aussi pour LiberoBuds:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 22
an acoustic signal. The LED indicator (4) briefly lights up red and
a voice says, 'Power off'. Alternatively, you can place the earphones
in the charging cradle.
The first time the device is turned on, pairing is automatically started
– see 5.1 Bluetooth
Note – Automatic switch-off
The earphones have an automatic switch-off feature. If no
connection to your smartphone is made within 5 minutes, they
switch off automatically.
5.1. Bluetooth
Note – Pairing
• Make sure that your Bluetooth
and Bluetooth
• For more information, please refer to the operating instructions of
your terminal device.
• The earphones and the terminal device should be no further than 1
metre apart. The shorter the distance, the better.
• Make sure that the earphones are switched off.
• Device off: Remove the earphones from the charging cradle at
the same time. Both earphones switch on automatically and begin
pairing. The status LED (4) is lit blue for approximately 3 seconds.
Then the status LED (4) of the left earphone emits flashes of
alternating blue and red light. A voice says, 'Power on – Pairing'.
The earphones are searching for a Bluetooth
• Open the Bluetooth
until Hama LiberoBuds appears in the list of Bluetooth
found.
• Select Hama LiberoBuds and wait until the earphones are listed
as connected in the Bluetooth
voice says, 'Your headset has been connected'.
Manual mode
• Press and hold the Multifunction button (5) on both earphones
for approximately 2–3 seconds until a voice says, 'Power on'. The
earphones automatically connect to one another. Then the status
LED (4) of the left earphone emits flashes of alternating blue and
red light. The earphones are searching for a Bluetooth
• Open the Bluetooth
Hama LiberoBuds appears in the list of Bluetooth
pairing.
®
pairing
®
is activated.
®
settings on your terminal device and wait
®
settings on your terminal device and wait until
®
-capable terminal device is on
®
®
settings on your terminal device. A
®
connection.
devices
®
connection.
®
devices found.
®
5

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

001770640017706500177066

Table des Matières