Hands-Free Function - Hama MyVoice 640 Mode D'emploi

Note - Connection impaired
After the headset and terminal device have been paired, a
connection is established automatically. If the Bluetooth
connection is not established automatically, check the following:
• Check the Bluetooth
whether MyVoice 640 is connected. If not, repeat the steps
listed under 5.1 Bluetooth
• Check whether obstacles are impairing the range. If so, move
the devices closer together.
• The performance can also be affected by a weak battery.
5.3. Multi-pairing
• The headset can be paired with two terminal devices at once so
that, for example, you can use a private and a business mobile
phone simultaneously.
• To begin with, activate Bluetooth
device that you wish to pair.
• Pair the first terminal device with the headset as described in 5.1
Bluetooth
®
• Switch off the headset as described in 5 Operation (Switching
off).
• Activate Bluetooth
• Continue as decribed in 5.1 Bluetooth
• Once the second terminal device is connected, open the
Bluetooth settings on the first terminal device and select
MyVoice 640.
• Now both terminal devices are connected to the headset.

5.4. Hands-free function

Note
• Note that support for certain key functions may vary depending
on your terminal device.
• For more information, please refer to the operating instructions
of your terminal device.
You can use the headset as a hands-free set for your mobile
phone.
settings of your terminal device to see
®
Pairing.
on the second terminal device.
®
pairing.
®
only on the first terminal
®
Pairing.
®
®
7