Bluetooth ® Pairing - Hama Teens Guard Mode D'emploi

6. Bluetooth pairing
®
Note - pairing
• Ensure that the Bluetooth
activated .
• Please refer to the operating instructions of your device for more information .
The headphones and the device should not be more than 1 metre apart . The shorter the distance, the
better .
Switch the headphones on using the MFB key (3) .
1
Check the status of the status LED (4) and the announcements
If the LED (4) is flashing alternately and the announcement is:
5s
red + blue
If the LED (4) is flashing and the announcement is:
10s
® -enabled device is switched on and that the Bluetooth® function is
„Pairing"
„Your device is
connected"
blue
Headphones searching for a Bluetooth
connection .
The headphones are already paired with a
Bluetooth ® device .
®
8