SOUNDMASTER SLIMstage 30 Manuel D'utilisation page 7

External Rear Channel Output
ADVANCED
SLIMstage makes it possible to add external Rear Speakers to enhance
DEFAULT INPUT
INPUT PARAMETERS
the surround effect. The Rear Output is disabled while headphones
REAR
IR
are connected.
LOCK
VERSION
RESET
Tip: To add a MAINstageHD as external rear channel, connect a 3.5mm
stereo audio cable from the Rear Output to the Analog 1 input of the
REAR
rear MAINstageHD.
TYPE
LEVEL
Select REAR SPEAkER TYPE
TYPE
SLIMSTAGE
}}Action: Navigate to REAR channel menu and select
MAINSTAGE HD
L & R SPEAKER
desired item and press ENTER.
Result: Rear Channel Output will be optimized to support the
REAR
T YPE
connected Rear Speaker Type.
LEVEL
External Surround LEVEL
LEVEL
Adjusts output level to external rear surround speakers.
–10 ......... 0 ......... 10+
}}Action: Navigate to LEVEL and press ENTER. Utilizing
familiar surround source adjust rear level and press ENTER
Result: Selected rear level becomes default
Select IR SENSOR
ADVANCED
SLIMstage can be controlled via the normal FRONT IR Sensor, an
DEFAULT INPUT
INPUT PARAMETERS
optional REAR IR sensor, and the RS-232 port.
REAR
IR
LOCK Normal is FRONT. Select REAR if controlling via the RS-232 port
VERSION
(including if connecting an RF remote control adapter) or, if using
RESET
another SLIMstage as an external rear channel (to prevent your
IR
IR remote from inadvertently adjusting both SLIMstages).
FRONT REAR
}}Action: Navigate to IR SENSOR and press ENTER.
Result: IR SENSOR options will be displayed
IR SENSOR
}}}Action: Select FRONT or REAR and press ENTER
RECOVERY PRESS MUTE AND
SOURCE BUTTON AT THE SAME TIME
Result: If REAR is selected, confirming menu will display.
FOR 2 SECONDS
CONFIRM CANCEL IMPORTANT: To re-activate the FRONT IR SENSOR, press MUTE and
SOURCE buttons at the same time for 2 seconds.
}}Action: Select CONFIRM or CANCEL.
Result: The IR sensor will be switched to REAR. Front sensor
will stop working immediately.
Tip: For connectivity information and programming instruction
check the Soundmatters website.
SETUP LOCk
ADVANCED
Prevents accidental setup changes
DEFAULT INPUT
INPUT PARAMETERS
REAR
}}Action: 1. Navigate to LOCK setup
IR
LOCK
}}Action: 2. Select LOCK setup and press ENTER.
VERSION
RESET Result: LOCK setup menu is displayed
}}Action: Select CANCEL or LOCK and press ENTER
LOCK
Result: Setting will highlight
TO UNLOCK PRESS SETUP,
Result: The Setup will be locked from accidental changes
SPEAKER, EXIT BUT TON
CANCEL LOCK
To unlock SETUP, sequentially press SETUP,
on remote
, EXIT buttons
12
VERSION
ADVANCED
VERSION displays important information about your SLIMstage
DEFAULT INPUT
INPUT PARAMETERS
including model, serial number, electronic version and software
REAR
IR
version.
LOCK
VERSION
RESET
}}Action: Navigate to VERSION and press ENTER.
VERSION
MODEL: 40
ELECTRO: 1.00
SW: 1.0.0/1.0.0
SERIAL #: S1035000025
RESET all settings to Factory Default
ADVANCED
DEFAULT INPUT This resets all setup options back to their original factory default
INPUT PARAMETERS
REAR position.
IR
LOCK
}}Action: Navigate to RESET all to factory and press ENTER.
VERSION
RESET
Result: RESET options will be displayed
}}}Action: Select YES or NO and press ENTER
RESET
MASTER RESET TO FACTORY DEFAULT? Result: If YES, all Settings will be reset to the factory default
YES NO
condition.
Press EXIT to revert to previous menu
Press EXIT again to exit SETUP MENU.
English
13