COMPACT 1.4
Function F4 - Automatic unit operation
Selecting F4 allows the user to choose the comfort temperature 15ºC to 27ºC (59ºF to 71ºF),
which will be selected from the control panel
selecting, the display will switch between CA and the degrees selected. With this function the
unit automatically regulates and controls comfort temperature by acting on the compressors
and fan speed. Pressing the remote control key
(Manual Function). The unit runs initially in F4 with the default parameters.
Function F6 - ºF Selection
To activate this function, keep the On/Off
and then release the key to directly enable ºF. To return to ºC, keep the
panel pressed down with the display flashing C
on the control panel. The control is disabled when carrying out this operation, meaning it must
be registered again once finished.
-
+
or the remote control
cancels function F4 and moves to F0
key pressed down until the display shows F6 ,
, when it stops flashing, press the
11
ES
EN
. When
-
key on the control
+
key