Braun Exact Série Mode D'emploi Et Garantie page 3

English
Please read the use instructions
carefully and thoroughly before
using the appliance.
Warning
Keep the appliance dry.
Do not use the appliance on
irritated skin.
Never use the appliance if the
cutting head is damaged or
broken.
This appliance is not intended
for use by children or persons
with reduced physical, sensory
or mental capabilities, unless
they are given supervision by a
person responsible for their
safety. In general, we recom-
mend that you keep the appli-
ance out of reach of children.
Batteries may leak if empty or
not used for a longer time. In
order to protect you and the
appliance, please remove
batteries in a timely manner and
avoid skin contact whilst
handling leaking batteries.
Batteries
This appliance operates with
one AAA 1.5 V battery. For best
performance, use an alkaline
manganese battery (type LR03,
AM4, AAA, e.g. Duracell).
Make sure the appliance is
turned off.
Remove the battery com-
partment cover (4) by pulling
downwards (a).
Insert the battery with the (+)
and (–) poles in the direction
marked.
Close the battery compartment.
Using the appliance
Your Exact Series Precision
Trimmer is perfectly suited for
closely and safely removing any
unwanted hair on body and face
(e.g. neck, back, eye brows).
Slide the on/off switch (3) up to
turn the appliance on.
Place the cutting head (2)
against the hair to be removed
and guide it slowly against the
direction of hair growth. For
optimum results, pull the skin
taut with one hand while using.
The appliance comes with two
trimming combs in different
lengths for trimming hair to a
uniform length (e.g. eyebrow
shaping):
• short trimming comb (6):
5 mm / 1/5"
• long trimming comb (7):
8 mm / 1/3"
Ensure that the appliance is
turned off before attaching a
trimming comb.
We recommend that you start
with the long trimming comb.
Slide it over the cutting head (2)
until it clicks into place.
Turn on the appliance and
gently comb your eyebrow
against the direction of hair
growth as shown in (c). Ensure
that either one of the comb
sides is guided flat against the
skin.
Cleaning and maintenance
Always turn off the appliance
before cleaning.
Remove the cutting head (2) by
turning counterclockwise 90°
and then lifting it up.
You can rinse the detached
cutting head under warm
running water.
Please ensure that the cutting
head is complete dry before
attaching it.
For storage, attach the protec-
tive cap (1).
We recommend lubricating
the blade with a drop of light
machine oil twice a year or after
cleaning with water.
Subject to change without
notice.
This product conforms
to the EMC-Directive
2004/108/EC.
At the end of their life,
empty batteries and the
appliance should not be
thrown away with
general waste or rubbish.
Please dispose of them at a
Braun Service Centre or at an
appropriate local collection
point.
Guarantee
2 year guarantee against
material and workmanship
defects (except battery). This
guarantee is valid in those
countries where this product
is officially being sold.
3