Inserting Batteries - LaserLiner EasyCross-Laser Green Mode D'emploi

Safety instructions
Dealing with electromagnetic radiation
– The measuring device complies with electromagnetic
compatibility regulations and limits in accordance with
the EMC Directive 2014/30/EU.
– Local operating restrictions – for example, in hospitals, aircraft,
petrol stations or in the vicinity of people with pacemakers –
may apply. Electronic devices can potentially cause hazards or
interference or be subject to hazards or interference.
!
When transporting always switch off all lasers, secure
pendulum and push the slide switch (3) to the right.
Green laser technology
1

Inserting batteries

Open the battery compartment
and insert batteries (3 x typ AAA)
according to the symbols.
Be sure to pay attention to
polarity.
08
EN
Laser modules in DLD design stand for high line quality
as well as a clean and clear and therefore easily visible
line image. Unlike previous generations they are more
temperature-stable and energy efficient.
Furthermore, the human eye has a higher sensitivity to
the wave range of the green laser than the red laser,
for example. This makes the green laser diode appear
much brighter than the red one.
Green lasers, especially in the DLD design, thus offer
advantages with regards to how visible the laser line
is under unfavourable conditions.
6 times brighter than a typical 630 - 660 nm laser
–
+
– –