General Safety Instructions; Inserting Batteries - LaserLiner LaserCube Mode D'emploi

Read the operating instructions and the enclosed brochure
„Guarantee and additional notices" completely. Follow the
!
instructions they contain. This document must be kept in a
safe place and if the laser device is passed on, this document
must be passed on with it.
Line laser for alignment work on the ground
and on walls.

General safety instructions

– Attention: Do not look into the direct or reflected beam.
– The laser may not get into the hands of children!
– Do not point the laser beam towards persons.
– If a person's eyes are exposed to class 2 laser radiation, they
should shut their eyes and immediately move away from the beam.
– Do not expose the device to mechanical stress, extreme tempera-
tures, moisture or significant vibration.
– The device must only be used in accordance with its intended
purpose and within the scope of the specifications. Modifications
or changes to the device are not permitted, this will otherwise
invalidate the approval and safety specifications.
1

Inserting batteries

Open the battery compartment
and insert batteries according
to the symbols. Be sure to pay
attention to polarity.
1
2
04
GB
Laser radiation!
Do not stare into the beam!
Class 2 laser
< 1 mw · 635 nm
EN 60825-1:2014
4
3
1 Laser output windows
2 Battery compartment
(bottom)
3
ON / OFF switch
4 Vials
–