Connecting The Speaker Output Terminals; Using The Speaker Input; Connecting The Speaker Wires - Pioneer GM-D8400M Mode D'emploi

Connecting the Unit
Connecting the Speaker Output
Terminals
• Use a 10 AWG to 16 AWG wire for the speaker
wire.
1. Expose the end of the speaker wires
using nippers or a cutter by about
10 mm to 12 mm (3/8 in.).
2. Connect the speaker wires to the
speaker output terminals.
• Fix the speaker wires securely with the termi-
nal screws.
Terminal screws
Speaker output
terminal

Using the Speaker Input

Connect the car stereo speaker output
wires to the amplifier using the supplied
speaker input wire with RCA pin cord.
• Slide the input switch to the left (SP).
9
10 mm to 12 mm (3/8 in.)
Speaker wire
7 Connections when using the speaker
input
Car Stereo
White: Black:
Left + Left ≠
To RCA input
jack of this unit.

Connecting the Speaker Wires

Connect the speaker leads according to the
figures shown below.
Speaker output
Black: Red:
Right ≠ Right +
Speaker input
wire with RCA
pin cord
Subwoofer