Figure A.4: Target Selection Dialog Box; Figure A.5: Target Version Dialog Box - Avocent AutoView 1400 Guide D'installation Et D'utilisation

46 AutoView 1400/1500/2000 Installer/User Guide

Figure A.4: Target Selection Dialog Box

4. Select an AVRIQ module to upgrade and click the Version button. The Target Version dialog
box displays.

Figure A.5: Target Version Dialog Box

5. Click the Load Firmware button. The AVRIQ Load dialog box displays.
NOTE: The Load Firmware button displays for AVRIQ modules only; IAC modules are not upgradable.