FoodSaver FM2000 Notice D'emploi page 7

How to...
1. Make a Bag from a FoodSaver
1. Using scissors, cut enough bag material from roll
to hold item, plus 3 inches. Be sure to cut straight.
2. Move Easy Lock Latch to the open position. Open
appliance lid. Insert one end of bag material across
Sealing Strip.
3. Close lid and turn Easy Lock Latch to OPERATE
position.
4. Press Seal button.
5. When Seal Indicator Light turns off, sealing is
complete. Turn latch to OPEN position, lift lid and
remove bag.
Now you are ready to vacuum seal with your
new bag (see next page).
6
FM2000 Series_14EFM1.indd 9-10
www.FoodSaver.ca
Roll
®
Place Bag on Sealing Strip
Close and turn Easy Lock Latch to OPERATE position
Press Seal Button