Automatic Door Opening - Alcad MVC-130 Manuel D'utilisation

ENG - 13
VIDEODOOR ENTRY SYSTEM MONITOR
During the time periods for answering the call or for conversation, the system does not permit
any other monitor to use the auto switch-on function, but it does allow a monitor equipped
with an independent power supply to consult the memory or to open the menu .
SEVERAL MONITORS IN YOUR HOUSE
The call rings on all the monitors. The first to answer establishes communication with the visitor.
Only the screen of the main monitor is switched on but when answering from a secondary
one, the secondary screen switches on and the main switches off. Before answering a
secondary, you can push its auto switch-on pushbutton to visualize the visitor and answer
if you want. If you would prefer that all the monitors were switched-on with the call, it would
be necessary to add a power supply; please consult your installer.
The call rings on all the monitors
Panel Call
made to flat
The first person to answer establishes communication with the visitor.

AUTOMATIC DOOR OPENING

When this function is enabled, the door opens immediately the dwelling is called. This is
particularly useful in the case of services open to the public, such as lawyers or dentists. Please
consult your installer to enable this function.
To activate this function: while the monitor is on stand-by, press the automatic switch-on button
for 2 seconds. The door-opening button will blink continuously as long as this function
remains enabled.
Monitor in
stand-by
Long push Door opening
> 2 seg. button blinking
To disable this function: while the monitor is on stand-by, again press the automatic switch-on
button for 2 seconds. The door-opening button will stop blinking.