Opening And Closing Roller Blinds; Maintaining And Cleaning The Pleated Blind - Dometic Car Plissee Instructions De Montage Et De Service

Opening and closing roller blinds

6 Opening and closing roller blinds
A
NOTICE! Risk of damage due to a build-up of heat between the
roller blind and the window pane
In strong sunlight, only close the blackout roller blind two thirds of the
way.
I
NOTE
The roller blinds should not remain fully closed for a long period of time
because otherwise the material will fatigue.
If a vehicle is stationary for a long period of time, close the roller blinds
so that both roller blinds are slightly apart and the fabric is ventilated on
both sides (as a precaution against mould).
Supplementary to fig. 8
➤ The blackout roller blind and the fly screen can be moved separately from one
another.
Hold each rod in the centre and slide the relevant roller blind into the desired
position.
The blackout roller blind can also be connected to the fly screen. The rods are
magnetic.
7 Maintaining and cleaning the pleated
blind
A
NOTICE!
Do not use any sharp or hard objects for cleaning since they may
damage the material.
➤ Clean the roller blind with mild soap and plenty of water.
6
Car Plissee
EN