Reference Measurement; Important Notices - LaserLiner DistanceMaster Pocket Pro Mode D'emploi

Reference measurement:

Reference length
Set reference length
1a. Selection of
tens position
4. Slow beeping:
The measurement is within ± 100 mm of the reference value.
Rapid beeping:
The measurement is within ± 1 mm of the reference value.

Important notices

No objects may get into the laser's line of measurement.
temperatures. Therefore allow the device a brief adaptation period
when changing locations with large temperature differences.
be used in strong sunlight.
Measure to flat surfaces.
measurement results.
the housing.
16
GB
1b. Number
set-up
reference
stop
1x
2. Define reference
value
3. Now move the laser
90°
1x