Computer - PowerPeak Exclusive Line FET8326P Mode D'emploi

COMPUTER
Batteries
This computer runs on 2 UM3 (AA 1.5V) batteries.
Turn computer on
Press a key or move the pedals to start the computer. There will be a sound signal the moment the
display is turned on.
Note: if the computer does not receive a signal for more than 4 minutes, the computer will
automatically switch to sleeping mode.
Keys
DOWN:
UP:
RECOVERY:
MODE:
RESET:
TTL/RESET (total reset): Reset all values to '0'.
Specifications
SCAN: the computer will rotate through the following functions: SPEED, RPM (rotations per minute),
TIME, DISTANCE, CALORIES and PULSE
TIME: 00:00 – 99:59 minutes
DISTANCE: 0,0 – 99,99 km
CALORIES: 0 – 999 Kcal
PULSE: 30 – 240 beats per minute
R.P.M. (ROTATIONS PER MINUTE): 0 – 999 rotations
SPEED: 0,0 – 99,9 km per hour
1. Select a function.
2. Set the value of a function.
1. Select a function.
2. Set the value of a function.
Measuring your condition.
1. Confirming a selected function.
2. Confirming the set value.
Reset the value of a certain function to '0'.
33