Maintenance And Use - PowerPeak Exclusive Line FET8326P Mode D'emploi

Step 10: assembling the covers
Attach the covers (38L/R) on the moving handles with four screws (39) and a screw (40). Attach the
front cover plates (45L/R) to the pedal tubes with a screw (46) and a screw (99). Attach the rear cover
plates (51L/R + 52L/R) on the pedal tubes with two screws (99) and a screw (104).
Step 11
When the installation is complete carefully check and ensure all the screws and nuts are fastened firmly.
MAINTENANCE AND USE
• This device requires a regular check‐up to prevent physical injury. This means that bolts and nuts
should be frequently checked for cracks and sharp edges etc.
• Defective components must be replaced immediately. If this is not possible, the device must be put
out of order until the necessary repairs have been made.
• Clean only with a damp cloth, do not use solvent cleaners.
• This product is intended for use in clean, dry conditions. You should avoid storage in excessively cold
or damp places as this may lead to corrosion and other related problems.
32