Function And Features - IFM Electronic efector duolis O2D200 Notice De Montage

Function and features

The contour sensor uses backlight to compare the contours on an
object with reference contours. Depending on the degree of mat-
ching the test object is classified as being a good object or a bad
object.
Operating distance L
When selecting the operating distance it has to be taken into account
that the relevant contour or the relevant contour areas should cover
approx. 50 ... 70 % of the field of view (see illustration on the next
page). For the operating distance L depending on the application plea-
se see the following table.
Typ O2D200, O2D201
Operating distance L [mm]
Field of view
Typ O2D202, O2D203
Operating distance L [mm]
Field of view
Typ O2D204, O2D205
Operating distance L [mm]
Field of view
The size and the mounting position of the backlight should be selec-
ted so that the object or the relevant object areas are sufficiently illu-
minated.
75
[mm]
14x18
50
[mm] 14.5x19 22x28 29x37.5
50
[mm] 22x28 33x42
100 200
20x26 40x52
75 100
75 100
43.5x56 87x112
400
80x104
200 400
58x75 116x150
200 400
174x224
7