Network Configuration - Teac CR-H700 Mode D'emploi

Software update
The software of the unit can be updated via the Internet
connection, so that you are able to use the latest features
of the unit. Regularly check for updates.
Press the SOURCE button repeatedly to select
1
TUNER mode.
Select "Internet Radio" by pressing the BAND
2
button repeatedly.
Open "Setup Menu".
3
Press the MENU/FM MODE button.
›Setup Menu
Device Name
Select "Software Update" from "Setup Menu".
4
Turn the MULTI JOG knob to select the item, and then
press the ENTER button.
Setup Menu
›Software Update
If an update is available, the unit automatically starts
download and installation of the new software.

Network Configuration

< You can check the current software version of your
unit using "Setup Menu". Follow the menu items as
follows:
Searching an access point
If you have moved or modified your network
environment, or if you have a problem connecting
to the Internet, perform the initial network setup to
establish the Internet connection again.
Follow the menu items as follows:
Manual Internet setup
You can check and modify detailed settings of the
Internet connection.
Follow the menu items as follows:
To check the current network settings
To configure Wired LAN settings
To configure Wireless LAN settings
To check the Radio ID of your unit
The Radio ID may be required when you contact our
customer support.
Follow the menu items as follows:
"Setup Menu" w "Information" w "Firmware Version"
"Setup Menu" w "Network" w "Wireless" w "Search
AP"
"Setup Menu" w "Information"
Select "Setup Menu" w "Network" w "Wired", and
then adjust "DHCP" and "Proxy Setting".
Select "Setup Menu" w "Network" w "Wireless",
and then adjust "DHCP", "SSID", "Security", "Key", and
"Proxy Setting".
"Setup Menu" w "Information" w "MAC Address"
45