Erasing Files From A Usb Storage Device - Teac AD-800 Mode D'emploi

CAUTION
Do not disconnect the USB storage device during erasing.
Do not turn the unit off or disconnect the power cord during
erasing. Doing so might cause damage to the AD-800 and the
connected USB storage device.
Erasing all files
CAUTION
Using this function will erase all the contents of a USB storage
device. Non-audio files that are not recognized by this unit
will also be erased. Confirm that this is acceptable before
beginning this operation.
1
Press the SOURCE button repeatedly to select "USB".
2
Connect an external USB storage device to the USB port
of this unit.
3
Press the ERASE button for more than 2 seconds.
"Erase all?" appears on the display.
4
Within 6 seconds, press the ERASE button again.
The USB storage device is completely erased.
"NO MUSIC FILE" appears on the display.

Erasing Files from a USB Storage Device

Hold down
more than 2 sec.
Erasing a file
1
Start playing the file that you want to delete (page 26).
2
Press the ERASE button.
"Erase file?" appears on the display.
3
Within 6 seconds, press the ERASE button again.
"Erasing" appears on the display, the file currently being played is
erased, and playback stops.
31