Periodic Inspection - Etac Molift RgoSling Shadow Manuel D'utilisation

Molift RgoSling / www.etac.com
Wash symbols:
Slings can be washed at temperatures
ranging from 60 up to 85º C.
176
Tumble drying, max 45º C.
Do not iron
Do not dryclean
Do not bleach
Periodic Inspection Scope
Periodic inspection is a visual examination of the
sling according to Periodic Inspection Report for
Etac/Molift Slings. This can be found on
www.etac.com.
If the inspection reveals any dan-
ger to safety, the sling shall imme-
diately be taken out of service and
be disposed of.
Periodic inspection must be carried out at least
every 6 months. More regular inspection may be
required if the sling is used or washed more often
than is normal. The inspection must be performed
by trained personnel.
When performing a periodic inspection, the
inspector shall fill out the inspection report for
Etac/Molift Slings. The reports should be retained
by the person(s) responsible for inspecting the
sling. If the inspection reveals defects and dam-
ages, the owner shall be notified.
When periodic inspection is completed the inspec-
tor shall mark periodic label showing the date
when periodic inspection is performed.
The periodic inspection label can be found behind
the product label, and this will then indicate
Maintenance
Cleaning and disinfection
Washing and drying at higher temperatures
wears out the material faster. The sling must be
inspected regularly, preferably prior to each lifting
operation but especially after it has been washed.
Recycling
Refer to "Recycling instructions" for how to
properly dispose of product. This can be found on
www.etac.com.

Periodic Inspection

when next service should be performed (within 6
months from last inspection).
When sling is used for the first time, the periodic
inspection label should be marked with month
and year. That way it is easier to know when first
periodic inspection should be performed.
12
Make sure not to damage or
remove labels when cleaning.