Maintenance; Replacing The Battery; Cleaning; Calibration - Chauvin Arnoux PAC 12 CVH Mode D'emploi

For maintenance, use only specified spare parts. The manufacturer will not be
held responsible for any accident occurring following a repair done other than
by its After Sales Service or approved repairers.

5.1/ REPLACING THE BATTERY

- Completely disconnect the clamp from the circuit to be measured from your oscilloscope.
- Unscrew the tool release screw holding the cover of the battery compartment.
- Replace the 9 V battery (type 6LF22, 6LR61 or NEDA 1604).
- Replace the cover of the battery compartment.

5.2/ CLEANING

Keep the jaw faces and mechanism perfectly clean.
The body of the clamp should be cleaned with a cloth moistened with soapy water.
Rinse with a cloth moistened with clean water.
Never expose the clamp to running water.

5.3/ CALIBRATION

It is essential that all measuring instruments are regularly calibrated.
For checking and calibration of your instrument, please contact our accredited laboratories (list
on request) or the Chauvin Arnoux subsidiary or Agent in your country.

5.4/ MAINTENANCE

Repairs under or out of guarantee: please return the product to your distributor.
5/ MAINTENANCE
1 7