Location And Function Of Controls; Front Panel - Sony SSM-175A Mode D'emploi

Location and Function of Controls

Front Panel

1
INPUT
select
switch
6
1 INPUT select switch
Keep this switch released (øA) to monitor the signal from
the VIDEO A IN connector.
Depress this switch (ØB) to monitor the signal from the
VIDEO B IN connector.
2 H-HOLD (horizontal hold) control
When the picture has slanting horizontal bars, turn the H-
HOLD control in either direction until a stationary picture is
obtained.
2
H-Hold
control
3 V-HOLD (vertical hold) control
When the picture rolls up or down on the screen, turn the V-
3
HOLD control until a single stationary pictures is obtained.
V-HOLD
control
4 POWER switch and indicator
To turn on the monitor, depress this switch. The green
indicator lights up.
To turn off the monitor, press the switch again.
4
POWER switch
5 CONTRAST control
and indicator
Turn clockwise to increase picture contrast and
counterclockwise to decrease it.
5
CONTRAST
control
6 BRIGHT (brightness) control
Turn clockwise for a brighter picture and counterclockwise
6 for a darker picture.
BRIGHT control