Power Sources; Battery Power - Trevi HR-405 Mode D'emploi

ENGLISH
AC POWER
You can power your portable system by plugging the detachable AC power cord into the AC inlet on the
back of the unit and into a wall AC power outlet. Check that the rated voltage of your unit matches your
local voltage of your local voltage. Make sure that the AC power cord is fully inserted into the unit.

BATTERY POWER

Insert 6"C" size batteries in the Battery Compartment. Be sure that the batteries are inserted correctly to
avoid damage to the unit. Always remove the batteries when unit will not be used for a long period of time,
as this will cause leakage to the batteries and subsequently damage to your set.
LOCATION OF CONTROLS
Handle
DC Compartment

POWER SOURCES

8
E-4
AUX-IN Jack
Head Phone Jack
AC Jack
Insert 6"C" size batteries
into battery compartment
HR - 405