Trevi HR-405 Mode D'emploi page 11

ENGLISH
CD PROGRAMMING
UP TO 20 TRACKS CAN BE PROGRAMMED FOR DISC PLAY IN ANY ORDER.
TO PROGRAM
1) SET IN CD MODE.
2) PRESS THE PROGRAM BUTTON, DISPLAY WILL SHOW 01 AND FLASH, AND THEN IT CHANGES
TO 00.
3) SELECT A DESIRED TRACK BY USING THE SKIP BUTTONS.
4) PRESS THE PROGRAM BUTTON TO ENTER THE TRACK INTO SETTING.
5) LED DISPLAY CHANGES TO 02, AND THEN CHANGES TO 00 AGAIN.
6) REPEAT 3~5, UP TO 20 TRACKS. AFTER REGISTER 20 TRACKS, THE DISPLAY SHOWS 01 AND
FLASHES AGAIN.
TO COMPLETE PROGRAMMING AND START PLAY
PRESS PLAY BUTTON, PROGRAM PLAY AUTOMATICALLY.
TO TERMINATE PROGRAMMING
1) PRESS THE STOP BUTTON ONCE TO CANCEL PROGRAM.
GENERAL OPERATION
STOP / EJECT KEY
FAST FORWARD KEY &
FAST REWIND KEY
PLAY KEY
PAUSE KEY
RECORD KEY
PLAYBACK
- SET THE FUNCTION SELECTOR TO TAPE POSITION.
- PUT IN YOUR CASSETTE TAPE.
- PRESS PLAY KEY TO ACTIVATE PLAYBACK.
- ADJUST THE VOLUME CONTROL TO THE DESIRED LEVEL.
- USE PAUSE KEY WHEN YOU WANT TO STOP PLAYBACK TEMPORARILY.
- PRESS STOP / EJECT KEY WHEN FINISHED.
RECORDING
RECORDING FROM RADIO
• SET IN TUNER MODE.
• TUNE IN YOUR STATION AND PUT IN YOUR CASSETTE TAPE.
PRESS RECORD KEY AND THE PLAY KEY OF DECK AT THE SAME TIME TO START RECORDING.
• PRESS STOP / EJECT KEY WHEN FINISHED.
TAPE OPERATION
PRESS TO STOP ALL DECK OPERATIONS. PRESS AGAIN TO OPEN THE
CASSETTE DOORS.
PRESS TO START RAPID TAPE WINDING IN EITHER FORWARD OR REVERSE
DIRECTION. PRESS STOP / EJECT KEYS WHEN THE CASSETTE SPOOLS
STOP TURNING.
PRESS TO START PLAYING TAPE.
PRESS TO STOP TAPE OPERATION TEMPORARILY. PRESS AGAIN TO
RESUME TAPE OPERATION.
PRESS RECORD KEY TOGETHER WITH PL AY KEY TO START RECORDING.
E-7
11
HR - 405