Trevi HR-405 Mode D'emploi page 6

ENGLISH
WARNING : TO PREVENT FIRE OR SHOCK HAZARD DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE
WARNING : SHOCK HAZARD-DO NOT OPEN
AVIS : RISQUE DE CHOC ELECTRIQUE-NE PAS OUVRIR
This marking is located at the bottom of the unit
The lighting flash with arrowhead symbol, within an equilateral triangle, is
intended to alert the user to the presence of uninsulated dangerous voltage
within the products enclosure that may be of sufficient magnitude to
constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle, is intended to alert
the user to the presence of important operating and maintenance (servicing)
instructions in the literature accompanying the appliance.
The following label has been affixed to the unit, listing the proper procedure
for working with the laser beam.
THIS LABEL IS ATTACHED TO INFORM THAT THE APPARATUS CONTAINS
1.
A LASER COMPONENT.
2. THE WARNING LABLE INFORMING OF RADIATION IS PLACED INSIDE THE
UNIT. TO WARN AGAINST FURTHER MEASURES ON THE UNIT.
THE EQUIPMENT CONTAINS A LASER RADIATING LASER RAYS ACCORDING
TO THE LIMIT OF LASER PRODUCT OF CLASS 1.
1
CLASS 1 LASER PRODUCT
DANGER : INVISIBLE LASER
RADIATION WHEN OPEN AND
INTERLOCKS DEFEATED, AVOID
EXPOSURE TO BEAM
AUTO OFF
"This product is equipped with an auto power-save function at the CD mode, if the unit remains in STOP, PAUSE or NO DISC mode for more than 10 minutes
it will automatically switch off. To switch the unit back on, slide the FUNCTION switch to 'OFF' position and then back to CD again.
PRECAUTIONS FOR CORRECT DISPOSAL OF THE PRODUCT.
The symbol shown on the equipment indicates that waste must be disposed of in "separate collection" and so the product must not be disposed of together with
urban waste.
The user must take the product to special "separate waste collection centres" provided by local government, or deliver it to the retailer against the purchase of
a new product.
Separate collection of waste and subsequent treatment, recycling and disposal operations promotes the production of equipment with recycled materials and limits
negative effects on the environment and on health caused by improper handling of waste.
Illegal disposal of the product leads to the enforcement of administrative penalties.
2
E-1
SAFETY INSTRUCTIONS
1. READ INSTRUCTIONS-All the safety and
operating instructions should be read before
the appliance is operated.
2. RETAIN INSTRUCTIONS-The safety and
operating instruction should be retained for future
reference.
3. HEED WARNINGS-All warnings on the appliance
and in the operating instructions should be
adhered to.
4. FOLLOW INSTRUCTIONS-All operating
instructions should be followed.
5. WATER AND MOISTURE-The appliance should
not be used near water, for example, near a
bathtub, washbowl, kitchen sink, laundrytub,
swimming pool or in a wet basement
6. VENTILATION-The appliance should be situated
so that its location or position does not interfere
with its proper ventilation. For example, the
appliance should not be situated on a bed, sofa,
rug or similar surface that may block the
ventilation openings, placed in a built-in
installation, such as a bookcase or cabinet that
may impede the flow of air through the ventilation
openings.
7. HEAT-The appliance should be situated away
from heat sources such as radiators, stoves, or
other appliances (including amplifiers) that
produce heat.
8. POWER SOURCE-The appliance should be
connected to a power supply only of the type
described in the operating instructions or as
marked on the appliance.
9. GROUNDING-Precautions should be taken to
ensure that the grounding means of an appliance
is not defeated.
10. POWER CORD PROTECTION-Power supply
cords should be routed so that they are not likely
to be walked on or pinched by items placed
upon or against them.
11. POWER LINES-An out door antenna should be
located away from power lines.
12. NON-USE PERIODS-The power cord of the
appliance should be unplugged from the outlet
when the appliance is to be left un-used for a
long period of time.
13. OBJECT and LIQUID ENTRY-Care should be
taken so that objects do not fall and liquids are
not spilled into the enclosure through openings.
6
HR - 405
14. DAMAGE REQUIRING SERVICE-The appliance
should be serviced by qualified service personnel
when :
A. The power-supply cord or plug has been
damaged.
B. Objects have fallen into, or liquid has been
spilled into the appliance enclosure.
C. The appliance has been exposed to rain.
D. The appliance has been dropped, or the
enclosure damaged.
E. The appliance does not appear to operate
normally or exhibits a marked change in
performance.
15. SERVICING-The user should not attempt to
service the appliance beyond that described in
the user operating instructions. All other servicing
should be referred to qualified service personnel.
16. ATTENTION-While this cassette deck offers a
recording facility, the manufacturer wishes to
point out that recording copyright material
requires prior consent from the copyright owners.
NOTES:
1) It is preferred to retain CD inside the unit even
when it is not in use .This prevents dust
accumulation on optical lens.
2) Dirty or scratched CD may cause a skipping
problem. Clean or replace the CD.
3) If an error display or malfunction occurs,
disconnect the AC cord and remove all the
batteries. Then turn the power back on.
BEFORE OPERATION
NOTES-CONCERNING COMPACT DISCS.
Since dirty, damaged or warped discs may damage
the unit, care should be taken of the followings items:
1. a. Usable compact discs
Use only compact disc with the mark shown
below.
b. CD compact disc only with digital audio
signals.
E-2