Floor Installation; Precabled Electric Connections - aerauliqa AIRQURE-P1 Manuel D'installation, D'utilisation Et D'entretien

5.6 Floor installation

The unit must be installed in the following position.
Spirit Level
Fig. 5.g
5.g Prepare the surface where the unit is to be mounted. Make sure that the surface is flat, leveled and that it supports the weight
of the unit. Perform the installation in accordance with local rules and regulations.
5.h Use appropriate screws (not supplied) to fix the unit to the ceiling. It is recommended to fit the unit with anti-vibration mounts
(not supplied).

5.7 Precabled electric connections

The installation and service of the unit and complete ventilation system must be performed
by an authorized installer and in accordance with local rules and regulations.
AIRQURE P1-N
The unit must be earthed.
The AIRQURE P1-N is wired internally from factory.
Unit comes pre-wired with:
- mains supply cable (3-core: brown, blue, yellow/green).
- wiring cable to remote switch (2-core: blue, brown).
16
Make sure that the mains supply to the unit is disconnected before
performing any installation, service, maintenance or electrical work!
CONTROL
Fig. 5.i Electric connection AIRQURE P1-N.
Fig. 5.h
ATTENZIONE
POWER SUPPLY
N L