Dimensions And Weight; Space Required; Rating Labels; Transport And Storage - aerauliqa AIRQURE-P1 Manuel D'installation, D'utilisation Et D'entretien

3.2 Dimensions (mm) and Weight (kg)
386
Weight 8,3

3.3 Space required

Make sure that enough space is left around the unit to allow easy maintenance (access to filters, terminal box and inspection
panel removal).

3.4 Rating labels

Fig.3.c Rating labels.

4 TRANSPORT AND STORAGE

The appliance is delivered in one carton box.
The appliance should be stored and transported in such a way that it is protected against physical damage that can harm spigots,
casing, display etc...
It should be covered so that dust, rain and snow cannot enter and damage the unit and its components.

5 INSTALLATION

This section describes how to install the unit correctly. The unit must be installed according to these instructions.

5.1 Unpacking

Verify that the unit (and eventual accessories) delivered is according to order before starting the installation. Any discrepancies
from the ordered equipment must be reported to the supplier.

5.2 Where/how to install

• A IRQURE P1 unit are meant for indoor installation in a heated space.
• T he unit should be mounted horizontally.
• M ount the unit on flat surface (ceiling or floor).
• It's important that the unit is completely leveled before it is put into operation.
• When choosing the location it should be kept in mind that the unit requires maintenance regularly and that the inspection door
should be easily accessible.
• Leave free space for opening the removable panel and for removal of the main components
14
457
500
WARNING
Make sure that specific warnings and cautions in Chapter 2
"Precautions" are carefully read, understood and applied!
WARNING
Make sure that specific warnings and cautions in Chapter 2
"Precautions" are carefully read, understood and applied!
44
506