Other Functions; Locking The Remote Controller Buttons (Operation Function Limit Controller) - Mitsubishi Electric CITY MULTI PKFY-P VKM-E Série Manuel D'utilisation

6. Timer
<Checking the Current Auto Off Timer Setting>
4
TIMER
AFTER
1. Be sure that the "Auto Off" is visible on the screen (at 1).
2. Hold down the Timer Menu button b for 3 seconds, so that "Monitor"
is indicated on the screen (at 4).
• The timer remaining to shutdown appears at 5.
3. To close the monitor and return to the standard control screen, press
the Operation mode (Back) button 2.
<To Turn Off the Auto Off Timer...>
z Hold down the Timer On/Off button 9 for 3 seconds, so that "Timer
Off" appears (at 6) and the timer value (at 7) disappears.
°C
6
z Alternatively, turn off the air conditioner itself. The timer value (at 7)
will disappear from the screen.
<To Turn On the Auto Off Timer...>
z Hold down the Timer On/Off button 9 for 3 seconds. The "Timer
Off" indication disappears (at 6), and the timer setting comes on the
display (at 7).
z Alternatively, turn on the air conditioner. The timer value will appear at
7.
AFTER
°C
6

7. Other Functions

7.1. Locking the Remote Controller Buttons
(Operation function limit controller)
„ If you wish, you can lock the remote controller buttons. You can use
the Function Selection of remote controller to select which type of
locking function to use. (For information about selecting the lock type,
see section 8, item [4]–2 (1)).
Specifically, you can use either of the following two locking functions.
1 Lock All Buttons:
Locks all of the buttons on the remote controller.
2 Lock All Except ON/OFF:
Locks all buttons other than the ON/OFF button.
Note:
The "Locking function" indicator appears on the screen to indicate that
buttons are currently locked.
TIME SUN
°C
TEMP.
MENU ON/OFF
BACK MONITOR/SET DAY
PAR-21MAA CLOCK
5
Timer Setting
OFF
1
AUTO OFF
7
°C
AUTO OFF
7
AUTO OFF
7
OFF
°C
AUTO OFF
1
Locking function
indicator
FUNCTION
°C
ON/OFF
1
FILTER
4
CHECK TEST
OPERATION CLEAR
6.2. For wireless remote controller
AUTO STOP AUTO START
1 Press the
or button (TIMER SET).
• Time can be set while the following symbol is blinking.
OFF timer : A
is blinking.
ON timer : A
is blinking.
h
min
2 Use the
and buttons to set the desired time.
3 Canceling the timer.
To cancel the OFF timer, press the
To cancel the ON timer, press the
• It is possible to combine both OFF and ON timers.
• Pressing the ON/OFF button of the remote controller during timer
mode to stop the unit will cancel the timers.
• If the current time has not been set, the timer operation cannot be
used.
<How to Lock the Buttons>
1. While holding down the Filter button 4, press and hold down the
ON/OFF button 1 for 2 seconds. The "Locking function" indicator
appears on the screen (at 1), indicating that the locking function is
now engaged.
* If locking has been disabled in Function Selection of remote
controller, the screen will display the "Not Available" message when
you press the buttons as described above.
°C
°C
• If you press a locked button, the "Locking function" indicator (at 1)
will blink on the display.
°C
°C
<How to Unlock the Buttons>
1. While holding down the Filter button 4, press and hold down the ON/
OFF button 1 for 2 seconds—so that the "Locking function" indicator
disappears from the screen (at 1).
°C
°C
A
13
2
AUTO STOP
button.
AUTO START
button.
1
FUNCTION
1
FUNCTION
1
11