Electrical Connection - AEG LAVATHERM 65278AC Notice D'utilisation

44
It is possible to adjust the height of the
tumble dryer. To do that adjust the feet
(see picture).
15mm
UNPACKING
CAUTION!
Before use all parts of the transport
packaging must be removed.
To remove the polystyrene blockages:
1. Open the load door.
2. Pull 2 plastic hoses with the poly-
styrene blockages out from the
drum.
INSTALLATION UNDER A
COUNTER
The appliance can be installed as free-
standing or below the kitchen counter
with correct space (see picture).
> 850 mm
THE LOAD DOOR REVERSAL
The load door can be installed by the
user in the opposite side if there is a
limit to install the appliance. (see sepa-
rate leaflet).

ELECTRICAL CONNECTION

• Connect the machine to an earthed
• Make sure that the electrical data on
• Always use a correctly installed
• Do not use multiple plugs and exten-
• Should the appliance power supply
• Make sure not to squash or cause
• Do not pull the mains cable to dis-
• The plug must be dry.
x2
600 mm
600 mm
socket, in accordance with current
wiring regulations.
the rating plate agrees with the pow-
er supply.
shockproof socket.
sion cables. There is a risk of fire.
cable need to be replaced, this must
be carried out by our Service Centre.
damage to the mains plug and cable
behind the appliance.
connect the appliance. Always pull
the mains plug.