Electrical Connection - AEG LAVATHERM 5127AC Notice D'utilisation

74 www.aeg.com
15mm
12.2 Unpacking
CAUTION!
Before use all parts of the transport
packaging must be removed.
To remove the polystyrene blockages:
1. Open the load door.
2.
Pull plastic hose with the polystyrene
blockages out from the drum.
12.3 Installation under a
counter
The appliance can be installed as free-
standing or below the kitchen counter
with correct space (see picture).
> 850 mm
600 mm
540 mm
12.4 The load door reversal
The load door can be installed by the
user in the opposite side. It can help to
easily put and remove the laundry or if
there is a limit to install the appliance.
(see separate leaflet).

12.5 Electrical connection

• Connect the machine to an earthed
socket, in accordance with current wir-
ing regulations.
• Make sure that the electrical data on
the rating plate agrees with the power
supply.
• Always use a correctly installed shock-
proof socket.
• Do not use multiple plugs and exten-
sion cables. There is a risk of fire.
• Should the appliance power supply
cable need to be replaced, this must
be carried out by our Service Centre.
• Make sure not to squash or cause
damage to the mains plug and cable
behind the appliance.
• Do not pull the mains cable to discon-
nect the appliance. Always pull the
mains plug.
• The plug must be dry.