Grease Filters; Replacing The Carbon Filter - Pelgrim WA205WIT Notice D'utilisation

MAINTENANCE

Grease filters

1
2
Carbon filter
Lighting
Clean the grease filters at least once a month. During cleaning, the
aluminium parts of the filters may become dull as a result of the
cleaning agents used, particularly when placed in the dishwasher. This
is normal and is not covered by the warranty.
Removing filter cassette
1. Using the recess, press the filter backwards and tip it downwards
at the front.
2. Remove the filter from the hood.

Replacing the carbon filter

The carbon filter must always be used if the cooker hood is not ducted.
1. Remove the grease filter.
2. Attach the carbon filters to the grease filter.
3. Replace the filter grid in the extractor hood.
Note:
• Saturation of the activated charcoal will eventually occur after more
or less prolonged use, depending on the type of cooking and how
frequently the grease filter is cleaned.
• In all cases it is necessary to replace the cartridge at least every
four months.
• DO NOT wash or reuse the carbon filter. Saturated carbon is not
environmentally friendly, change the filter regularly.
Change the LED light
1. To replace the LED lamp remove the light fitting after unscrewing
the screw "A"
This gives access to the LED lamp.
2. Unscrew the lamp from the fitting and replace it with a LED lamp
matching the wattage.
The lamp in this household appliance is only suitable for illumination of
this appliance. The lamp is not suitable for household room illumination.
EN 7