Publicité
UA-20 application guide
Recording from a mic
fig.mic.e
Turn on if you
want to monitor.
fig.mic-con.e
Use the Input volume to adjust the input level.
Check the input level on the application that you are using.
If you turn the input monitor switch to ON, the sound will be output from the
headphone jack and the master output jacks.
* Howling could be produced depending on the location of microphones relative to speakers.
This can be remedied by:
1. Changing the orientation of the microphone(s).
2. Relocating microphone(s) at a greater distance from speakers.
3. Lowering volume levels.
58
Set this to
MIC.
Signal flow
Adjust the
input level.
Microphone
Publicité
