Publicité
xfig.05-46e_30
3
With the volume turned down
on the UA-20 and on your
peripheral audio equipment,
click [Start Test].
Test signals will be output from the
UA-20; left first, then right, as
indicated in the screen.
4
In the Sound dialog box, click the Input tab.
In Choose a source for sound input (Device), select USB
audio.
* Do not check "Play sound through output device".
fig.05-49e_30
5
When you are finished
making settings, close the
Sound dialog box.
From the File menu, select Quit.
Getting Connected and Installing Drivers (Macintosh)
The output volume of the UA-
20 cannot be adjusted with the
Mac OS sound dialog box.
Make volume adjustments
through other means, such as
on the speaker system you are
using.
If USB audio is not displayed,
close the "Sound" dialog box,
and disconnect the UA-20's
USB cable from the Macintosh.
Perform the driver installation
(p. 53) once again.
55
Publicité
