Recording From The Aux Input - Edirol UA-1X Mode D'emploi

Using the UA-1X

Recording from the AUX Input

fig.07-05
If the input signal level is high
(causing the sound to distort),
set this to "HIGH."
Computer
USB
connector
If the input signal level is high (causing the sound to distort), set INPUT SELECT
to "HIGH".
Be Careful of Looped Connections
fig.loop
UA-1X
If you connect the UA-1X as shown in the above diagram with another device that
passes the input audio back to the output (e.g., a MD/DAT in recording mode), the
sound will loop between the UA-1X and the other device, causing oscillation and
producing an unexpected high volume. Be aware that such connections can cause
malfunctions or damage your speakers.
12
INPUT
Signal flow
If you are using a record player, use a player that has a built-in phono
equalizer. If your record player does not have a phono equalizer, output
the sound through a speaker system that has a phono equalizer.
Loop Connection
INPUT
OUTPUT
Audio amplifier / MIDI Sound module
( Cassette, Record players)
Audio Cable
Stereo set
(Cassette, record player)
LINE OUT
LINE IN
External Output jacks
(LINE OUT)
Stereo
Headphones