Publicité
Getting Connected and Installing Drivers (Windows)
Windows 2000 users
1
With the UA-20 disconnected, start up Windows.
Disconnect all USB cables except for a USB keyboard and USB
mouse (if used).
2
Log on to Windows as a user with administrative
privileges (such as Administrator).
3
Open the System Properties dialog box.
Click the Windows Start button, and from the menu that
appears, select Settings | Control Panel. In Control Panel,
double-click the System icon.
fig.05-2e_30
4
Click the Hardware tab,
and then click [Driver
Signature].
Open the Driver Signing
Options dialog box.
fig.05-3e_30
5
Make sure that "File
signature verification" is
set to "Ignore".
If it is set to "Ignore", simply
click [OK].
If it is not set to "Ignore", make
a note of the current setting
("Warn" or "Block"). Then
change the setting to "Ignore"
and click [OK].
After installing the driver, restore the original setting.
(
If you changed "File signature verification" (p. 28))
24
If the UA-20 is already
connected to your computer
and a message of "Add New
Hardware Wizard" is
displayed, go to the included
CD-ROM folder named
DRIVER\USB_XP2K\WDM or
DRIVER\USB_XP2K\MME,
open the file Readme_e.htm,
and read the
"Troubleshooting" section
entitled "You attempted to
install using the above
procedure, but were not able
to.".
If you changed "File
signature verification" in
step 5, you must restore the
previous setting after you have
installed the driver. (–> If you
changed "File signature
verification" (p. 28))
Publicité
