Publicité
Getting Connected and Installing Drivers (Macintosh)
fig.05-37e_30
8
In order to check that
detection has been
completed, once again go
to "Apple System
Profiler", and select
"Update all
information" from the Commands menu.
In the USB area, three audio devices will be displayed.
If these are displayed correctly, driver installation has
succeeded. In the File menu, click Quit to close "Apple
System Profiler".
If they are not displayed correctly, disconnect the UA-20,
wait for about ten seconds, and then repeat the procedure
from step 2.
Next, you will need to make the driver settings.
Settings the sound input/output
fig.05-44e_30
1
From the Apple menu, select
Control Panel – Sound.
The Sound dialog box will appear.
fig.05-45e_30
2
Click the Speakers tab or
Speaker Settings.
54
The main volume slider will
not move.
Publicité
