Drinks outlet with Milk module - daily cleaning
1.
The machine must be switched-off.
2.
Remove the outlet cover (P .1).
3.
Quarter turn clockwise with the inlet (P .2) (Bayonet Lock).
4.
Drag down the milk outlet, the spout tube and the connecting piece.
5.
Clean all parts thoroughly.
6.
Clean the nozzles with the special brush.
7.
Put the parts in reverse order, together again.
8.
Check the tubes! There should be no kinked.
Instant module - daily cleaning
1.
The machine must be switched-off.
2.
Close the powder injection and clean the powder tubes(P .1).
3.
Remove the cup interlock; counterclockwise (P .2).
4.
Remove the mixer cup.
5.
Clean all parts thoroughly and wait until they are dried.
6.
Put the parts in reverse order, together again.
P .2
P .1
Operating Instructions - S500
Operating Instructions - S500
Steam outlet or Powersteam - daily cleaning
1.
Fill the milk jug with 0.7 litre cold water and 60ml or 2 measuring cups cappucle-
aner (
oder
57´045
57´084
2.
Unscrew the steam nozzle from the steam outlet and place it int the milk jug.
3.
Hold the steam outlet by the black handle and plunge into the jug.
4.
Press the STEAM KEY and foam the cleaning fluid.
** Unscrew the lower end by the Powersteam outlet.
5.
6.
Clean all parts thoroughly.
7.
Put the parts in reverse order, together again.
*
Powersteam is available as option be the S545.
** Step 5 is in use by the Powersteam in two parts.
Coffee outlet - weekly cleaning
1.
The machine must be switched-off.
2.
Remove the outlet cover (P .1).
3.
Remove the Coffee outlet (P .2).
4.
Clean all parts thoroughly. Use the special brush for the nozzles.
5.
Put the parts in reverse order, together again.
).
P .2:
rotate 90°
P .1
P .1
P .2
55
55