Using The Equalizer; Recalling Equalizer Curves; Adjusting Equalizer Curves; Adjusting Loudness - Pioneer SuperTuner III DEH-3400 Mode D'emploi

Audio Adjustments

Using the equalizer

The equalizer lets you adjust the equalization to
match car interior acoustic characteristics as
desired.

Recalling equalizer curves

There are six stored equalizer curves which you
can easily recall at any time. Here is a list of the
equalizer curves:
Display
SPR-BASS
POWERFUL
NATURAL
VOCAL
CUSTOM
EQ FLAT
• is an adjusted equalizer curve that
CUSTOM
you create.
• When
EQ FLAT
correction is made to the sound. This is useful
to check the effect of the equalizer curves by
switching alternatively between
set equalizer curve.
Press to select the equalizer.
EQ
• If the equalizer has been previously set to an
equalizer curve other than
title of that previously selected equalizer curve
will be displayed, such as
,
NATURAL VOCAL
13 En
Equalizer curve
Super bass
Powerful
Natural
Vocal
Custom
Flat
is selected no supplement or
EQ FLAT
POWERFUL
,
SPR-BASS
, , or
CUSTOM EQ FLAT

Adjusting equalizer curves

You can adjust the currently selected equalizer
curve setting as desired. Adjusted equalizer
curve settings are memorized in
1 Press
Press
AUDIO
the display.
2 Select the band you want to adjust with
the 2/3.
EQ-L (low)
3 Press 5 or ∞ to adjust the equalizer curve.
Each press of 5 or ∞ increases or decreases
the equalizer curve respectively.
• –
+6 –6
increased or decreased.
• The actual range of the adjustments are differ-
ent depending on which equalizer curve is
selected.
Note
• If you make adjustments when a curve other
than
curve will replace the previous curve. Then a
new curve with
and a
play while selecting the equalizer curve.

Adjusting loudness

then the
Loudness compensates for deficiencies in the
low- and high-sound ranges at low volume.
.
1 Press
Press
AUDIO
to select the equalizer mode.
AUDIO
until
EQ-L/EQ-M/EQ-H
— —
EQ-M (mid) EQ-H (high)
is displayed as the equalizer curve is
is selected, the newly adjusted
CUSTOM
appears on the dis-
CUSTOM
to select
AUDIO LOUD
until appears in the display.
LOUD
.
CUSTOM
appears in
.