The Following Safety Precautions Must Be Taken - REHM BOOSTER.PRO 170 Instructions De Service

2

The following safety precautions must be taken

5
stainless, alloy and non-alloyed steels and non-ferrous metals and is the
ideal partner for all types of welding work.
Dry protective clothing must be worn. The eyes and face must be
protected by a welding mask.
The unit must be operated using earthed power sockets and mains
cables with properly connected earth conductors.
The unit must be maintained only by trained staff. In the event of
problems, please contact REHM Customer Service on +49 7161 3007-
85.
Accident Prevention
Processes" (BGR 500, Ch. 2.26) must be observed during the operation
of this unit. The main hazards are:

Fire and explosion

Harmful substances (gases, fumes, smoke / dust)

Optical radiation

Electrical hazards

Handling errors
The units are intended for electrode welding and TIG welding. They
must be operated only by people who have been trained and are
qualified in the use and maintenance of welding equipment.
The unit is designed in accordance with EN 55011 for Group 2 Class A
and is suitable for use in all areas, with the exception of living areas and
premises directly connected to a low voltage network which also
supplies residential buildings.
Requirements made of the main power supply
BOOSTER.PRO 210
This device complies with IEC 61000-3-12.
BOOSTER.PRO 170
WARNING: This equipment does not comply with EN/IEC 61000-3-12. If
it is connected to a public low voltage system, it is the responsibility of
the installer or user of the equipment to ensure, by consultation with the
distribution network operator if necessary, that the equipment may be
connected.
Regulation "Welding, Cutting and Related