Getting Started
[P-OFF WAIT]
Applicable only when the demonstration mode is turned off.
Sets the duration when the unit will automatically turn off (while in
standby mode) to save the battery.
[20M]: 20 minutes ; [40M]: 40 minutes ; [60M]: 60 minutes ;
[– – –]: Cancels
[F/W UPDATE]
[UPDATE SYSTEM]
[F/W UP xxxx]
[YES]: Starts upgrading the firmware. ; [NO]: Cancels (upgrading is not
activated).
For details on how to update the firmware, visit
<www.kenwood.com/cs/ce/>.
[FACTORY RESET]
[YES]: Resets the settings to default (except the stored station). ;
[NO]: Cancels.
[ENGLISH]
[РУССКИЙ]
Select the display language for [FUNCTION] menu and music information
[ESPANOL]
if applicable.
By default, [ENGLISH] is selected.
[FRANCAIS]
[DEUTSCH]
Change the crossover type
Press B SRC repeatedly to enter STANDBY.
1
2
Press and hold number buttons 4 and 5 to enter crossover select.
The current crossover type appears.
3
Turn the volume knob to select "2WAY" or "3WAY", then press the
knob.
4
Turn the volume knob to select "YES" or "NO", then press the knob.
The selected crossover type appears.
• To cancel, press and hold
• To adjust the selected crossover settings, see page 24.
CAUTION
Select a crossover type according to how the speakers are connected.
(Page 31, 32)
If you select a wrong type:
• The speakers may damage.
• The output sound level may be extremely high or low.
.
ENGLISH
7