Technical Description; Description Of The Components - Dometic SANITATION Saneo B Instructions De Montage

Technical description

4 Technical description
The cassette toilet Saneo consists of a toilet permanently installed in the vehicle and
a removable, mobile cassette as a holding tank. The cassette is externally accessible
through a door. Depending on the model, the toilet gets the rinse water from a tank
integrated in the housing or from a freshwater tank in the vehicle.
The following model versions of the toilet are available:
• Saneo B, Saneo C: freestanding, without water tank, without console
• Saneo BS, Saneo CS: freestanding, without water tank, with console
• Saneo BW, Saneo CW: freestanding, with a water tank in the console
• Saneo BLP, Saneo CLP: freestanding, without water tank, low console
Saneo C models can be equipped with an interval flush (optional). The water is
pumped into the toilet bowl in short spurts in order to achieve improved flush
wetting and cleaning. The wetting and cleaning depend on the amount of water
available in the vehicle.
4.1

Description of the components

No. in
fig. 1, page 3
1
2
3
4
5
6
7
8
9
10
22
Label
Housing for cassette tank
Draining slider for toilet bowl
Rotatable toilet bowl, plastic or ceramic
Lid and seat, removable
Console
Control panel with level indicator and flushing
Only Saneo BW, CW
Only Saneo BW, CW
Cassette tank
Service door
:
Integrated freshwater tank
:
Tank flap (closable tank flap optional)
Saneo B, Saneo C
EN