Amica PB 4V 0 Série Mode D'emploi page 31

OPERATION
Residual heat indicator.
There are 4 indicators installed in the fore-part, under the ceramic plate (normally invisible).
Each of them is assigned to one heating zone, and is alight, if the temperature of the given
zone exceeds 50°C. The above allows you to fully use the accumulated heat e.g. to heat up
or to maintain the dish in warm condition, and simultaneously prevents you from being burned,
because the heating zones possess still a very high temperature, when switched off.
Connection to the control unit
The connection of the cooking plate to the control panel or the oven is possible thanks to a
bunch of electric conductors that are ended in male plugs. It is marked with colours (white,
green, blue, black, yellow). The connection takes place by putting of the male plug from the
bunch with the given colour into the socket of the control panel or of the oven marked with
the same colour.
31